電腦控制卷材夾緊送料整版沖切連續作業裁斷機()

適用于卷狀材汽車內飾行為用品腳墊、座椅、頂棚、方向盤，裝潢材料墊板革、地板磚、地毯，磨料模具行業砂紙、拋光片、拋光輪，制球類足球、排球等行業的大型自動化連續專業裁斷設備。

1.大噸位精密四柱雙油缸雙連桿自動平衡機構，保證了機器的裁斷速度和精度，所有滑動連接部位采用供油自動潤滑裝置，使磨損降至。

2.輸送部分采用PLC控制，由伺服電機驅動物料從機器的一面輸入，經整版裁切后，從另一面輸出，確保送料精準，運行平穩；并且送料從長度可以通過觸摸屏方式的調整，故障顯示信息，方便機器維修。

3.伺服電機夾緊進料、收料裝置，使對位精度控制在±0.2mm。

4.裁斷頭下壓時在接觸刀10mm前自動緩速，使裁斷多層材料時，最上層與最下層沒有尺寸誤差。

5.因裁斷平衡度精確，可以極大減少刀模及裁板的損耗，裁斷邊緣效果更好，減低裁斷板的消耗。

6.*模具設定構造，配合裁刀及裁斷高度，使沖程調整簡單、準確。

7.刀模的固定夾緊裝置，更換刀模方便快捷。

注：裁斷區域選用普通冷鋼焊接刀模。選用激光木樣刀模。特殊規格可定制。

Note: The selection of ordinary cold steel cutting die area. Selection of laser-like knife mold. Special specifications can be customized

Computer-controlled continuous cutting machine with clamping feeding device for roll materials

The machine is a large sized automatic continuous cutting machine which is applicable for cutting roll materials such as car floor mats, seats ,ceilings and steering wheels in automobile interior decoration industry ,backing plate leather ,floor tiles and carpets in decorative material industry, sａnd paper polished wafer and polished wheel in abrasive industry ,as well as football and volleyball in ball manufacturing industry.

1. Large-tonnage precision four-column double-cylinder double-link automatic balancing mechanism to ensure the cutting speed and accuracy of the machine, all sliding joints using central automatic lubrication device, so that wear and tear to a minimum.

2. The conveying part adopts PLC control. The servo motor drives the material to be inputted from one side of the machine. After cutting, the output from the other side ensures the feeding precision and smooth running. The feeding length can be adjusted by the touch screen. Display information to facilitate machine maintenance.

3. Servo motor clamping feed, receiving device, so that the control accuracy of ± 0.2mm.

4. Cutting under pressure when the first 10mm in contact with the knife before the automatic slow speed, so that when cutting multi-layer material, the top and bottom of the size of the error is not.

5. Due to the accuracy of the cutting balance, it can greatly reduce the loss of the cutter die and the cutting board, the edge effect is better, and the consumption of the cutting board is reduced.

6. Unique mold set structure, with the cutter and cutting height, so that stroke adjustment is simple and accurate.

7. Die fixed clamping device, easy to replace the cutter mold.